Feed & Care For Your Tools

For the care and feeding of your tools. This wax is an excellent conditioner for your wood and metal tools. Wipe a thin coat onto the surface of your tools, making sure to work the wax in to the pores of the material. This provides a protective barrier between your tool and the elements, helping resist rust and water-logging.

Feed-N-Wax should be used on finished and unfinished woods whenever wood starts to look faded or dry, usually every month or so.

Contains no silicone or linseed oils. Not intended for food-prep surfaces.

Usage Directions

Make sure surface is free from dust and dirt. Saturate a small soft cloth with Feed-N-Wax and wipe evenly onto surface. Let stand for at least 20 minutes before wiping off excess. Polish out with a clean soft cloth. More coats and longer dry time (overnight) may be necessary on unfinished wood surfaces.

Always test in an inconspicuous area to check results before applying to entire surface. Do not mix with other chemicals. Wear impervious gloves and safety glasses. Keep out of the reach of children. Contains Hydrogenated Mineral Oil.

FIRST AID TREATMENT: If swallowed, call a Physician or Poison Control Center immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with soap and water.

STORAGE: Store in a cool place. Keep cap closed.