Cardboard Printmaking with Kids: Chroma Classroom Art

Opus Resource Library

Cardboard Printmaking with Kids

For very young students, printmaking is a source of fascination and challenge.

Opposite to drawing and painting, printmaking is an indirect process. To make a print, something has to be done to one surface; the block, in order to produce an effect on another surface; the paper. Cutting and gluing card to form a block, rolling the ink and transferring the image onto the paper becomes a ‘kind of magic’ that students love.

If young students have had enough experience in cutting paper they will be able to produce a card print.

Supplies For This Lesson

Cardboard — Letter sized approximately 2mm thick. Allow one piece per student to use as a block
1–3 pieces of easy-to-cut cardboard, (cereal boxes, recycled manila folders are ideal) from which to cut out shapes to create the print
1 pair of scissors per student
Chalk for drawing
Plastic containers for glue. Allow 2 containers per group of 6 students
1 quart of school glue. Pour approximately 3 oz into each plastic container.
1 #6 hog hair paint brush per student used for glue application

8 foam trays to roll out paint
4 foam rollers 85mm wide
2 1/2 gallons of black or other dark coloured Chroma Paints
Paper — Letter sized white printer/copy paper; 3 or 4 pieces per student to print on
Newspaper to cover the tables in the printing area
Masking tape to tape newspaper or plastic sheets on tables
String and clothes pins to hang prints on to dry; a clothes drying rack is an alternative
A bucket of water and rags for cleaning up

Discuss with your students themes and ideas suitable for printmaking. Explain and demonstrate techniques to make and then print the block.

Classroom Arrangement

The first task that the teacher will be confronted with will be establishing an appropriate work area. The printmaking arrangement of the classroom consists of four separate areas:

1. Preparation area – for constructing the block – cutting and gluing by the students at their desks, arranged in groups of four. This printmaking project has been designed to suit normal classroom conditions and illustrates how the classroom can be adapted to create working space required.

2. Inking area – for inking the block – a table covered with newspaper and set up with four sets of foam trays.Each set of trays is comprised of two trays—one tray into which the paint is placed to roll up and the second tray into which the block is placed while the paint is rolled onto it.

3. Printing area – a clean, dry table where the A3 cartridge paper is placed and printed on with the paint coated block facing up.

4. Drying area – an area where clothesline or string can be strung and the prints hung secured with clothes pegs for drying.

Preparation of the card block

At the desks, students draw big and simple shapes with chalk on manila folders, card or cereal boxes and then cut out the shapes.

Drawing large shapes onto the card

Cutting the drawn shape

Glue shapes to the A4 card and allow the glue to dry overnight.

Gluing the cut out shape

Block sitting in tray ready for the paint to be applied

It is important to divide the students into small groups of four, to print.

One or two parent volunteers should be engaged to help organize the room and to supervise the students during the printing process.

Printing

To start printmaking, spread some of the paint in the roll up tray and roll the paint out in the tray with a foam roller, using up and down strokes.

Place the block in the other tray and ‘ink’ it using the paint, by rolling the roller over it several times in different directions—make sure all edges and corners of the block are covered with paint.

Rolling up the paint ready to apply onto the block

A3 paper with centered block facing up

Take the block to the printing table and place it with the inked side facing up.

Place a piece of A3 cartridge paper gently over the block and rub the back of the paper evenly with a flat hand, being careful not to move the paper.

Then, gently peel the paper off the block.

Gently rub the back of the paper whilst holding it in place with your free hand

Pulling the print

Repeat steps of rolling out the paint and inking the block to produce more prints. Students should produce between three or four prints.

Take the print to the drying area and hang it up until completely dry.

Lesson Outcomes

At the completion of the printmaking workshop, students would have learnt to simplify and enlarge shapes and to organize them within a space to create a design for printing.

Students should be familiar with the basic technique of printmaking; making a block and transferring the image onto paper and to become familiar with the process of creating multiple images from the one block
Students may use this printmaking experience to develop their evaluation skills as together they view and critique their finished art work
Teachers will have an understanding of the different aspects involved in printmaking, for example, the allocation of time and resources, art materials and equipment, room arrangement and printing techniques. This experience will contribute to their visual art practice in the classroom environment.